The CZ-USA P-10 C Ported is a 9mm striker-fired pistol with an integrated compensator—but I didn't expect it to work quite so well, so quickly.
Right out of the box it began shooting 1.0-inch and better groups at seven yards, offhand. Well, even gun writers get lucky at times, I figured.
So I kept shooting to see what this pistol and the writer were truly capable of achieving. And the CZ-USA P-10 C Ported kept pegging those 1.0-inch groups. With range ammo, no less.
Not each and every group. Some five shots spread out a bit, and I pulled a few that opened things up to two inches. But my best groups were tight and the averages just over an inch.
I backed up three more yards and groups widened, but not ridiculously so, even if still more than adequate to stop a threat.
It was my first experience of shooting this neat little handgun—and I don't think it'll be my last. Let me explain.
READ MORE: CZ Adds Two New 457 Rimfires for Very Different Shooters
What Makes the CZ-USA P-10 C Ported So Accurate
Credit for the pistol’s accuracy? First was clearly how comfortable and solid the CZ-USA P-10 C Ported felt in my hand. Firm grip, no wobble. Plus, my eyes went right to the luminescent three-dot sights, and the deep compensation cuts in the barrel and slide really did push the muzzle down especially when firing multiple shots fast.
Well before I finished shooting it, the P-10 C Ported struck me as an ultra-reliable home defense handgun that’s compact enough to be a great concealed carry option.
Alongside the retro CZ 75 Legend make no mistake: CZ-USA know how to build a quality handgun.
Compensator, Build Quality and Features
The Czech-made P-10 C Ported is the latest variation in CZ’s very popular line of P-10 striker fired 9mm pistols.
As noted, this one features an integrated compensator system built directly into the barrel and slide, and it did significantly reduce muzzle flip.
Those gases escaping via the barrel cut also gave the pistol a little nudge back into the web of my hand, providing good control and smoothing out the felt recoil.
Additionally, CZ made the 4-inch, cold hammer forged barrel on this model approximately 10% heavier than the barrel on standard P-10 Cs for a bit more stability.
Mounting Optics on the CZ P-10 C Ported Pistol
The factory milled optics-ready slide runs the same optic plate system as the standard P-10 models. Available adapter plates from CZ-USA include those for the DPP, RMR, and Venom footprints.
Holosun’s SCS-P-10-GR is actually designed to mount directly to the slide of this and other optics-ready P10’s.
I ran my test P-10 C Ported with the standard three dot sights and they were first rate. The dots featured a greenish luminescent cast that caught the light well and got me on target fast.
CZ also cut extended cocking serrations into the slide for better slide manipulation, including serrations atop the slide and just behind the front sight post.
The reinforced polymer frame is nicely textured with tiny, raised squares along both sides of the grips and the back and front straps. A light or laser will easily attach to the under-barrel rail molded into the frame, too.
The trigger on my test pistol averaged 2 pounds, 6 ounces of pull and, though striker fired, the trigger snapped off pretty cleanly and reset quickly.
The pistol sells with two 15-round magazines for 15+1 9mm ammo capacity. The magazines loaded easily by hand and the round-count windows along the rear of the mags showed up nicely.
The magwell sported a slight flaring that helped the magazines pop in easily. The mags also clicked out of the grip with some force at the press of the mag release.
READ MORE: Best Gun Deals: Save Big on Pistols, Rifles, Optics, Ammo, and Silencers
CZ-USA P-10 C Ported Pistol Range Test
I began my shooting with two brands of 9mm range ammunition: Federal Ammunition’s Syntech Training Match, the 147-grain bullets coated with a thin film of purple poly; and SIG SAUER loaded with a 115-grain full-metal jacket bullet.
I ran a few magazines worth of the Syntech to familiarize myself with the pistol and rather quickly was drilling those tight groups.
For accuracy testing, I shot the range rounds at seven yards offhand.
My best five-shot groups with the Syntech came in at .60- and .85-inches and six groups averaged out to 1.4 inches.
The Sig 9mm pegged its best groups at .50- and .90-inches, while the average of six groups was 1.2-inches. I switched over to 9mm self-defense loads. At 7 yards offhand, Nosler ASP (Assured Stopping Power) and its 147-grain jacketed hollow points drilled two .80-inch groups.
I moved to 10 yards, still offhand, and fired off 13 rounds of the Nosler for a 2.4-inch group, with 9 of those shots constituting a 1.1-inch cluster.
I only had a single box of the Winchester USA Ready Defense, loaded with 124-grain bullets featuring the Hex-Vent Rigid Insert up front. I started shooting the ammo at seven yards, liked what I saw, and then backed up to 10 yards and ran the last 13 rounds at a target.
Those 13 rounds measured out at 2.3-inches, with 10 of the shots at 1.6-inches.
CZ-USA P-10 C Ported Handgun Specs
Caliber: 9mm
Magazine Capacity: 15+1
Action: Semi-Automatic, Striker Fired
Barrel Length: 4.02 inches
Overall Length: 7.36 inches
Height: 5.2 inches
Weight: 26.1 ounces, w/Empty Magazine
Frame: Fiber-Reinforced Polymer
Sights: Fixed Three-Dot, Luminescent
Optics-Ready: Yes
Grips: Textured Poly
Safety: Trigger Safety, Firing Pin Block
MSRP: $599
Verdict: A Lot of Handgun for a Fair Price
The CZ P-10 C Ported sports a suggested retail of $599, which I consider a lot of handgun for the money. It's available for only $539.99 at Sportman's Warehouse.
This a great deal on a very solid pistol that I would definitely be comfortable carrying and having on my nightstand.
The integrated compensator genuinely works. If you're looking for a compact 9mm that performs well above its price point, the P-10 C Ported belongs on your shortlist.
